Skip to content

Plain-language guides to ATV and quad ownership and riding

Friday, November 20, 2026

Search

Choosing an ATV Helmet: Types, Fit and Certification Marks

atv helmet

Choosing an ATV helmet comes down to three checks: the right type, a snug fit and a certification mark you can verify. Start with the mark, then spend real time on fit before you buy.

This guide is part of our series on how to ride an atv, and it covers the head-protection side of that topic.

Item Value
US legal standard for motorcycle helmets FMVSS 218 (DOT)
DOT minimum inner liner thickness 0.75-inch
ECE 22.06 implemented End of 2023
Snell standards for motorcycle helmets M2020D and M2020R
Snell’s record as a standards body Over 60 years
Suggested in-store fit trial 10 minutes

The figures come from Motorcycle.com’s helmet ratings explainer and the Snell Memorial Foundation FAQ. Standards and rules can change, so check the source before you rely on them.

What the certification marks on a helmet mean

The sources behind this guide describe motorcycle helmet standards, and they do not cover ATV-specific rules. Use them to understand what each mark tells you, and ask your local authority and your vehicle’s manual what is required where you ride.

As of Motorcycle.com’s May 2025 explainer, all helmets sold in the US must meet DOT standards as defined by FMVSS 218. That standard sets minimum requirements for impact resistance, penetration and retention, including an inner liner at least 0.75-inch thick. See the explainer for the detail.

Three marks come up most often:

  • DOT: the US baseline, which relies on manufacturer self-certification and random testing after a helmet is already on the market, according to Motorcycle.com.
  • ECE: a European standard that is widely recognised elsewhere. Per the same article, ECE 22.06 was implemented at the end of 2023.
  • Snell: a voluntary certification from a private non-profit, often seen as an extra layer of assurance, with two motorcycle standards named M2020D and M2020R, as the Snell FAQ explains.

How a helmet protects your head

According to the Snell Memorial Foundation, the damage in most head injuries comes from a sudden stop, not from the fall itself. A helmet works by making that stop less sudden.

The head keeps moving a little longer by crushing a soft impact liner between the head and the hard outer shell. Snell says this liner is usually made of EPS, expanded polystyrene.

The liner has limited room to crush. If it runs out before the head stops, Snell notes, the head still has to stop abruptly, which is why liner thickness and firmness are both tested.

A rider travels along a rocky trail beneath a dark ridge.

Helmet types and the features that matter

The source pack does not rank helmet shapes or styles against each other, so this guide does not either. Check the vehicle manual and your local rules for any required type, then compare the features that standards actually test.

Motorcycle.com lists several parts of a helmet that certification tests can cover:

  • Retention strap performance, which keeps the helmet on during a crash.
  • Chin bar strength on helmets that have one.
  • Face shield penetration and, under ECE, optical quality.
  • Impact absorption on different surfaces and at different speeds.

If a helmet type lacks one of these parts, such as a face shield, that test simply does not apply to it. Ask the maker which standard the specific model meets.

Fit: how to test a helmet before you buy

Snell points out that a buyer can judge style and price quickly, but that size and comfort take longer. Its FAQ suggests wearing a helmet for 10 minutes before deciding, as described on the Snell FAQ page.

A practical routine looks like this:

  1. Try the helmet on with the gear you normally ride in, such as glasses or a neck warmer.
  2. Keep it on for the full trial and note any pressure points.
  3. Fasten the strap and check that the helmet does not shift as you turn your head.
  4. Look for certification and date-of-manufacture stickers before you pay.

A helmet is only one layer of kit, and the guide on what to wear when riding an atv covers the rest. If your rides include slopes, the notes on how to ride an atv on hills explain technique that no helmet can replace.

Spotting fake or unverified labels

Motorcycle.com warns that many novelty helmets carry fake DOT stickers, or none, and will not protect you in an impact. Its article says self-certification opens the door for counterfeit “DOT approved” helmets to reach shops (source).

The same article advises checking the certification and date-of-manufacture stickers inside or on the back of the helmet. A helmet that meets even the least stringent standard is better than one that meets none.

Snell says every certified model on the retail market is randomly purchased and tested, and riders can verify a Snell helmet by model and size on its website (Snell FAQ).

Is DOT, ECE or Snell the better choice?

The sources disagree on emphasis, so it helps to read each claim as that organisation’s view. Snell calls its standards the most stringent for impact protection and describes DOT and ECE as government minimums. It also says ECE helmets are not required anywhere outside Europe.

Motorcycle.com instead says ECE standards often include more rigorous testing than DOT, and that ECE-certified helmets are generally considered to offer a high level of protection. It adds that Snell is often seen as an extra layer on top.

On the ECE change, a helmet maker’s certification page says 22.05 set 6 points of impact on the shell, and 22.06 added 12 points. It also says the newer standard introduced a rotational impact test.

The same page explains that this maker does not certify to Snell, because it argues the double-strike test would require an overly stiff, rigid shell. That is one manufacturer’s reasoning, not a verdict on the standard.

In practice, choose a helmet whose mark you can verify and which fits well. Then confirm with your local authority which standard your riding area requires.

Frequently asked questions

Does an ATV helmet have to carry a Snell mark?

Show answer

No. Snell labelling is voluntary, so it is an extra assurance rather than a general legal requirement. Rules for ATV riders differ by place, so ask your local authority.

Can I choose a helmet by how it looks?

Show answer

Looks and price are the easy parts to judge, and Snell says the protection level is much harder to assess by eye. Use appearance as a tiebreaker after the certification mark and fit.

What is the practical difference between ECE 22.05 and 22.06?

Show answer

The newer ECE 22.06 testing covers more impact locations and adds a rotational test, according to a manufacturer’s certification page. Check which version a helmet’s label shows before you compare two models.

Who can tell me whether a helmet is legally required?

Show answer

Your local licensing or transport authority, or the land manager where you ride. This guide gives general education, not legal advice, and the sources it uses cover motorcycle helmets.